How Does a Plumber Fix a Clogged Toilet?
If you’ve ever had to call a plumber for a clogged toilet, you’re probably wondering how they go about fixing a clogged toilet. While plungers do work for most clogs, plumbers use a tool called a toilet auger to cut through the hard stuff and free up the water flowing through the toilet. Here’s how they do it. Plumbing company
A clogged toilet can be caused by a variety of problems, including a larger problem with the sewer line. These can include accumulations of debris and tree roots that block the line. If you suspect that a larger issue is the problem, a plumber can perform a camera inspection of the pipe to locate the cause of the clog. Another cause of clogged toilets is hard water, which can calcify the inside of drain pipes, restricting water flow and causing more frequent toilet clogs. A professional plumber can help flush out the system and install a water softener to prevent hard water from becoming an issue.
If you can’t solve the clog by flushing the toilet, use a plunger to open up the trap. You can buy a plunger that has a special extension for drains. Try to use the plunger repeatedly and work it into the trap until it makes the tightest seal possible. You may have to try this several times, but you might be surprised by how easy it is to clear the toilet.
Another way to fix a clogged toilet is to try to clear it yourself using a plunger or plumbing snake. Plungers are effective tools that push the clogging material out of the toilet. If you can’t use a plunger or a plumbing snake, you can try baking soda and vinegar. They both contain chemicals that can clean and deodorize the toilet. If none of these methods work, a plumber can try to use an auger.
If you can’t use a plunger, you can try flushing the toilet with a half gallon of water and one teaspoon of baking soda or vinegar. Then wait 15 minutes and add hot water again to restart the lubrication process. Once the water level drops, flush the toilet again. This will clear the clog and prevent the need for a plumber. However, if you’ve already tried the plunger, you can also try using a plunger to force water through the drain.
To use a plunger, you need to insert the plunger into the toilet bowl and lower it slowly. This will create a large air bubble that will push the clog out of the pipe. Once the air bubble has been released, you should use a softer plunger. You can also try the plunger repeatedly – but be patient, this process may take several attempts and some elbow grease.
For an inexpensive way to unclog a toilet, you can use a wet/dry vacuum. The trick is to use rubber gloves to protect your hands and to avoid splashing water all over the place. To use a wet/dry vacuum, you should place the hose into the toilet drain and wrap a towel around it to create suction. Then, you should wait for the mixture to sit for 20 minutes.
